Teak Deck Installation (continued)
Continued from page 24
first, leaving all the screws in place. The screws were removed last. As each screw was removed the hole in the deck was immediately filled with filler. The entire deck was sanded, faired and prepared for the teak plank installation.
The planks were installed with adhesive one at a time starting from the toe rail and working in. The planks were weighed down with cement weights along their entire length. After all the teak planks had been installed the caulking was installed between the planks and then allowed to cure for the appropriate length of time. Finally the caulking was sanded off and all the deck fittings were reinstalled.
Frequently asked questions
How are teak deck planks attached without leaving screw holes?+
The planks are installed with adhesive one at a time, starting from the toe rail and working inward. Cement weights are placed along the entire length of each plank to hold it down while the adhesive cures.
What is the process for removing old screws during a teak deck installation?+
The old deck components are removed first while leaving all the screws in place. The screws are then removed last, and each hole is immediately filled with filler as the screw comes out.
How is the substrate prepared before installing teak planks?+
After the screw holes are filled, the entire deck is sanded and faired to create a smooth, level surface ready to receive the teak plank installation.
When is the caulking applied between teak deck planks?+
Caulking is installed between the planks only after all the teak planks have been adhered in place. It is then allowed to cure for the appropriate length of time before being sanded flush.
What is the final step in a teak deck installation?+
Once the caulking has cured and been sanded off, all the deck fittings are reinstalled to complete the job.